Re-partition Operation Failed. Odin __hot__ File

Hardware dropouts mid-flash frequently trigger write errors. Ensure a stable pipeline before testing new files.

This article will provide a comprehensive guide to understanding and fixing the "Re-Partition operation failed" error in Odin.

A) Wrong firmware or model mismatch

Manually checking the "Re-Partition" box in Odin without providing a dedicated .pit file.

The re-partition failure in Odin is most often caused by a mismatched PIT or incorrect firmware selection. Recovery requires either disabling the re-partition flag or obtaining the exact PIT and firmware combination for the target device. In severe cases, a low-level NAND erase or service center intervention may be necessary. re-partition operation failed. odin

Go to Settings > About Phone (if the phone is still booting) or check the original box. Ensure the firmware you downloaded corresponds exactly to your model number (e.g., SM-S908B vs. SM-S908U).

The “Re-Partition operation failed” error is almost always – not a hardware failure. In 95% of cases, it resolves by using the correct 4-file firmware with HOME_CSC or manually providing the matching PIT file. Only rare eMMC logical damage requires JTAG repair. Users should never ignore this error by force-flashing without re-partition – that leads to boot loops or I/O mount failures.

It's essentially a blueprint for your phone's storage, detailing the name, size, and location of every partition. By feeding this blueprint to Odin, you guide it through the process of completely rebuilding the partition table.

Use tools like or Frija to download the exact stock firmware for your specific Samsung model (e.g., SM-G991B) and region. 2. Open Odin and Load Files Open the newest version of Odin as Administrator. Hardware dropouts mid-flash frequently trigger write errors

During a firmware flash procedure using Odin, the operation failed at the re-partition stage. The device did not complete the flashing process and remains in a non-bootable state (e.g., download mode or bootloop). The error was displayed in Odin’s log window, halting further progress.

Flashing a Samsung device can be an intimidating process, particularly when an unexpected error interrupts your progress. If you are reading this, you’ve likely been staring at a glowing blue progress bar in the Odin flash tool, only to see it suddenly stall and flash a stark red sign—accompanied by the dreaded "Re-partition operation failed" message.

: Right-click the Odin executable and select Run as Administrator to ensure it has the necessary system permissions.

When Odin throws a re-partition failure, it means the software cannot write or verify this map. The root causes typically fall into three categories: A) Wrong firmware or model mismatch Manually checking

If you are currently stuck, follow these steps to resolve the error:

The operation failed catastrophically.

Re-open Odin, right-click the executable, and select Method 4: Use Samsung Smart Switch