Wella Climazon Millenium Manual Install -

The Wella Climazon Millenium is a popular hair straightening and styling tool. Here's a step-by-step manual installation guide to help you get started:

For wall installations, the Acrobat 2004 manual outlines critical safety measures:

Turn base upside down and tighten the main central locking nut securely.

Use a spirit level to ensure the bracket is perfectly vertical. If the bracket is tilted even slightly, the extension arm will drift or swing on its own. Mark the drilling holes clearly with a pencil. Step 2: Anchoring the Wall Bracket

Adjust the wall plate using a spirit level; check arm tension screws. Obstruction or tight transport screws wella climazon millenium manual install

Ensure your local main voltage matches the voltage specified on the device identification plate (typically 220–240V or 110–120V depending on the region).

Ensure the unit is not plugged into a wall outlet during assembly.

Q: What are the power requirements for the Wella Climazon Millenium? A: The Wella Climazon Millenium requires a dedicated electrical outlet (230V, 50Hz).

Hold the heavy metal wall bracket against the wall at the chosen height. Use a spirit level to ensure it is perfectly vertical. Mark the drilling holes using a pencil. Step 2: Anchor the Bracket The Wella Climazon Millenium is a popular hair

220V–240V AC / 50–60Hz (ensure your salon outlet matches) Circuit: Dedicated 10A minimum circuit recommended

Lay the base assembly on a flat, stable surface.

For Concrete/Brick: Drill holes using a masonry bit and insert heavy-duty expansion anchors (toggle bolts or concrete anchors).

Plug the power cord into a tested, grounded outlet. If the bracket is tilted even slightly, the

Turn on the main power switch located at the base or back of the head unit.

Proper installation ensures the unit can operate its specialized programs, such as "Color Volume by Perform," while maintaining the low energy consumption (up to 50% less than competitors) for which it is known.

Tighten the primary safety screw at the swivel joint to prevent the head from lifting off. Option B: Wall Mount Assembly

Comprehensive Installation and Setup Guide for the Wella Climazon Millennium

Ensure your salon’s power supply matches the unit's voltage requirements (usually 220-240V for EU/UK models).