Case Study -rev B- Fixed - Ccna-2v7.0

show ip interface brief : To verify interface statuses and IP assignments.

IP addresses are excluded for static devices (e.g., the default gateway and management station) using ip dhcp excluded-address . Verification on a client PC involves using ipconfig (or show ip dhcp binding on the router) to ensure leases are obtained correctly.

ip domain-name clearview.local username netadmin secret NetAdm1! crypto key generate rsa modulus 2048 ip ssh version 2 line vty 0 4 transport input ssh login local

It looks like you’re looking for a for the CCNA v7.0 (2.7.0) Case Study – Revision B . ccna-2v7.0 case study -rev b-

Use this checklist before submitting:

Router# configure terminal Router(config)# interface gigabitethernet 0/0 Router(config-if)# no shutdown Router(config)# interface gigabitethernet 0/0.10 Router(config-subif)# encapsulation dot1Q 10 Router(config-subif)# ip address 192.168.10.1 255.255.255.128 Router(config)# interface gigabitethernet 0/0.20 Router(config-subif)# encapsulation dot1Q 20 Router(config-subif)# ip address 192.168.10.129 255.255.255.192 Use code with caution. Phase 4: Dynamic IP Allocation (DHCPv4 Server)

Additionally, specific static routes may be required for the internal networks on the other side of the topology. Each router must have a route to every remote network not directly connected. Verification using show ip route and recursive ping tests ensures end-to-end connectivity. show ip interface brief : To verify interface

After implementing your configurations using a tool like Cisco Packet Tracer, you must routinely run the following Cisco IOS commands:

ip access-list extended HR_BLOCK permit ip any any deny ip 192.168.30.0 0.0.0.255 host 192.168.10.50

Router(config)# ip dhcp excluded-address 192.168.10.1 192.168.10.10 Router(config)# ip dhcp pool ENG_POOL Router(dhcp-config)# network 192.168.10.0 255.255.255.128 Router(dhcp-config)# default-router 192.168.10.1 Router(dhcp-config)# dns-server 8.8.8.8 Use code with caution. Phase 5: Routing Protocols and WAN Connectivity ip domain-name clearview

ip dhcp pool VLAN20 network 192.168.20.0 255.255.255.0 default-router 192.168.20.1 dns-server 8.8.8.8

: Mitigate programmatic login attacks by implementing threshold blocks: login block-for 60 attempts 3 within 60 Use code with caution.

To centralize addressing, serves as the central pool host for IPv4 clients. Remote requests from PHX-LAN-120 are dynamically forwarded across Layer 3 interfaces via an IP Helper Address . IPv4 Central Pools Setup (ChicagoRouter)