Do you have the that came with the device?
: Download the official Satlink Tool or Upgrade Tool v1.2 (or later). This executable file communicates directly with the meter's internal chipset.
After researching the WS6906 software update situation extensively, here are my final recommendations:
Many WS6906 owners have reported that the “Lock” light remains lit at all times, even when no signal is being received. This often occurs after a failed update or when incorrect satellite data is loaded. The recommended solution is to load a fresh “bin” file containing correct satellite and transponder data. One user created a file specifically to “unlock” locked devices; that file is available for free via Dropbox. satlink ws6906 software upd free download link
Some independent developers host legacy satellite meter tools and original factory dump files in open-source repositories.
Right-click the Windows Start button and open . Expand the Ports (COM & LPT) section to see which COM port number (e.g., COM3) your adapter is using. Note this number. 3. Launch the Upgrade Tool
To connect the Satlink WS-6906 to your PC, you cannot use a standard USB cable. You need: Do you have the that came with the device
Because satellite broadcasting frequencies and symbol rates change frequently, the internal database of the device needs to be refreshed periodically to prevent false readings or failure to lock onto a satellite. Why Do You Need to Update the Satlink WS6906 There are several compelling reasons to keep your up to date:
: Satellite frequencies change frequently; updates refresh the built-in database.
: The specialized 3.5mm jack to RS232 (DB9) serial cable included in the original box. One user created a file specifically to “unlock”
You will need a specific flashing utility tool, usually called or STB_Upgrade_Tool , compatible with the Ali chipset inside the meter. This tool is typically included in the download pack with the firmware. 3. Flash the Firmware Power off your Satlink WS-6906. Connect the serial cable from the meter to your PC. Open the upgrade tool software on your PC. Select the correct COM Port used by your serial cable. Click Browse and select your downloaded .bin firmware file. Set the upgrade mode to AllCode or Software .
If you can you are getting, I can give you a more tailored solution.