Bedside cleaning → Leak test → Manual washing → AER cycle → Drying storage → Pre-use check
Provides digital controls for brightness, structure enhancement, and patient data entry. Rear Panel Interfaces
Dedicated ports connect the processor to medical video recorders, documentation systems, and keyboards. Scope Connection (Front Panel)
Wait for the screen to display "W.B. OK". If "W.B. NG" (No Good) appears, check for lens cleanliness and repeat. 5. Cleaning, Disinfection, and Maintenance olympus cv290 manual 2021
Allows close-up inspection down to 2 millimeters from the mucosa for micro-surface characterization. Structure and Edge Enhancement
Proper mechanical and electrical integration prevents system failures and artifact interference during live clinical procedures. Core Interface Setup INSTRUCTIONS
Elias didn't answer. He just scrolled back to the index, preparing for the next error code, the next chapter in the quiet, desperate war against entropy. The manual was open. The light was on. Bedside cleaning → Leak test → Manual washing
Section 8: Troubleshooting. Subsection 4: Hardware Interface.
Highlights superficial mucosal microvessels to aid early cancer detection. Blue/UV excitation wavelengths
Press and hold the button on the CV-290 front panel for more than one second. preparing for the next error code
While both are powerful Olympus processors, the CV-190 (part of the EVIS EXERA III series) is generally positioned as a more economical system. The CV-290, part of the EVIS LUCERA ELITE series, represents the premium tier of Olympus endoscopy. Its key upgrades include:
While the endoscope itself undergoes rigorous high-level disinfection, the CV-290 processor requires specific environmental upkeep to prevent cross-contamination and hardware deterioration. Processor Maintenance Checklist
Note: The 2021 waterproof connector design eliminates the need for a soaking cap during cleaning, but contacts must be dry before connection. 3. Advanced Imaging Settings & Optimization
Keep the one-touch connector clean and dry, ensuring no water ingress. 4.2 Handling the Xenon Lamp